Gauges StreetFighter, SportBike & Motorcycle Accessories StreetFighters Inc.

 

Gauges / Instruments

 
 

To Order
Phone: 623-581-1994
Fax: 623-581-1994


Info@StreetFightersInc.com
Glendale, Arizona We Accept
 
Alien Helmets Apparel Belly Pans Brake Lines Brake Reservoirs Cafe Racer Accessories Crash Sliders
Fairings Fat Handle Bar Kits Fiberglass 3D Details Front Fenders Foot Pegs Foot Peg Lowering Kits Fuel Caps
Gauges Grips Handle Bars Handle Bar Kits Head-Light Sets Levers Lowering Kits Suspension
Mirrors Mirror Extensions Parts On Sale Pre-Load Adjuster Rear Sets Screw Sets Sliders
Tail Lifter Tail Lights Tail / Seats Turn Signals Water Hose Kits    
    Questions About Us StreetFighters Customer Fighters Disclaimer
          Links Testimonials
Aprilia Buell BMW Ducati Harley Davidson Honda Hyosung
Kawasaki KTM MV Agusta Suzuki Triumph Victory Yamaha
 
Motogadget Motoscope Pro
BME R Nine T Digital Gauge Motoscope
Pro
BMW R Nine T

1005031

The motoscope pro BMW R9T is the only plug & ride instrument on the market

The CAN-Bus interface of the motoscope pro enables the complete display of all original functions (except settings for heated grips). The original plug connector for the original wiring loom makes the instrument a real plug&ride solution and a very easy installation.

A LED matrix display enables an ultra thin housing design.
734 LED's, controlled by a 16-bit RISC processor - create an almost rimless, self-illuminating display. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a matter of course.

The rev-counter is displayed fully scalable via the analogue LED band with drag indicator function. Main and secondary display are user configurable. Another display section shows the gear currently engaged.

Four indicator lights are pre-installed and can be used for far more input signals.

The billet aluminum casing is CNC-machined and is easily mounted by two backside threaded holes. The instrument is equipped with an ABE approval. 

Parts delivered:
motoscope pro with ca. 70 cm connector cable, 2 stainless steel screws, detailed installation and operating instructions.

Available Accessories

Mounting bracket, part # MG1005032

Specifications and Features
Length, Height, Depth: 109 mm/ 47 mm/ 11 mm
Weight: approx. 100 g
Mounting: 2 x M3 threaded hole
Power consumption during operation: max. 200 mA (load dependent)
Power consumption in standby: 0.4 mA
Operating voltage: 9 V - 15 V
Operating temperature: -20... +80

Instructions

US$499.00
Bracket
BMW R Nine T

1005032

This bracket is designed for the motoscope pro BMW R9T. It is machined from aluminum and black anodized.
The eye-catching shape with a material thickness of 3,5 mm, the machined grooves and the chamfers gives it a light weight but rigid look.
All bolt holes are precisely drilled. The original bolts can still be used with it.

Length 116 mm, width 100,85 mm, height 34 mm, material thickness 3,5mm

US$62.00
Motoscope Pro Motoscope
Pro

1005030
The newest generation of dashboards from Motogadget
718 LED's generate an almost full-screen self-luminous display matrix
The anodized billet aluminum housing is very thin (11mm)
Analog LED bar graph with drag indicator function displays engine speed in a freely adjustable scale
The main and sub-display are configurable
Displays currently engaged gear
Four indicator lights are integrated
Touch spot on the display allows for complete control of the dashboard
Comes with an input for digital data bus systems (CAN bus)
Communicates via our own digital data bus with additional breakout boxes coming in the near future
Extremely versatile and adaptable to almost all vehicles and applications.
 
Functions:
- Speedo, rev-counter, shift light, trip and total odometer, trip time, gear indicator,
clock, on board voltage and more
- Utilizing an optional breakout box offers you up to 12 options such as inputs for tank
capacity/reserve, oil pressure switch, left and right indicators, high beam, neutral, engine
warning light, oil and water temperature, outside temperature, oil pressure measurement.

Instructions

US$448.00
Breakout Box for digital gauges

Breakout Box
A

for
Motoscope Pro

1005040

The MSP Breakout Box A enables you to use more functions in conjunction with the motoscope pro.

Convenient screw terminals make connecting wires easy.
Small dimensions allow for accommodating the numerous hidden cables and the box somewhere on the vehicle.

Between the box and the Motoscope pro there is only a single cable for signal transmission required (m-bus).
The breakout box is sealed waterproof and resistant to vibration.

Tank capacity / reserve, oil pressure switch, right turn signal, left turn signal, high beam, neutral, engine warning light

Dimensions (LxWxH): 26 x 39 x 10 mm

US$52.00
Breakout Box for digital gauges

Breakout Box
B

for
Motoscope Pro

1005041

The MSP Breakout Box B enables you to use the functions of the Breakout Box-A in addition to Temperature and Oil pressure.

Convenient screw terminals make connecting wires easy.
Small dimensions allow for accommodating the numerous hidden cables and the box somewhere on the vehicle.
Between the box and the Motoscope Pro there is only a single cable for signal transmission required (m-bus).
The breakout box is sealed waterproof and resistant to vibration.

Dimensions (LxWxH): 28 x 53 x 10 mm


Inputs for:
Tank capacity / reserve, oil pressure switch, turn signal right, left turn signal, high beam, neutral, engine warning light, oil temperature, water temperature, outside temperature, oil pressure.

WARNING! The breakout box B is only compatible with the Motoscope pro for the current generation of devices. It is not compatible with the first, older-generation devices (shown by the lack of barcode labels).
US$104.00
Air Temperature
Sensor
 
1005090
A very small sensor for measuring air temperature.
Connection wire approx. 30 cm.

Does only work for motoscope pro and breakout box B.

Please use MG9001001 for all other motogadget units

US$29.00
Motoscope Pro Bracket Bracket
for
Motoscope Pro

1005060
Mounting bracket for the Motoscope Pro.

Aluminum brushed and black anodized. Height of 128mm (5") and width of 108mm (4 1/4"). You can drill it and trim it to your custom specifications.

US$38.00
Breakout Box for digital gauges Triumph

Breakout Box
Triumph


for
Motoscope Pro

1005045

The MSP Breakout Box - Triumph
This breakout box for the Motoscope pro is a plug and play adapter for the Speed Triple and Street Triple with CAN-Bus.
There are no further modifications to the wiring harness needed. All the original functions of the OEM dashboard will be retained. The only exception is the fuel level display (if existing). Therefore you have an integrated gear indicator and fuel reserve indicator showing.
This unit is a great replacement if the original dashboard has been malfunctioning or damaged.  Furthermore it is a great looking display if you are converting the front end of your bike.
As of this time the unit has been tested for:

- Street Triple: Model 2008 (not R)
- Street Triple: Model 2010 (not R)
- Speed Triple: Model 2007
- Speed Triple: Model 2009

Please note that this list includes only very few models as we are continually testing compatibility with additional models.
The list will be reworked and appended. Please come back later.
Please note MODEL YEAR is not the same like the manufacturing year. The model year is important!
US$161.00 
Breakout Box
Harley Davidson
 
TwinCam engines 2004+

for
Motoscope Pro

1003113
The Breakout Box J1850 is an digital adapter module for the hassle-free connection of the motoscope pro in combination with several Harley Davidson's.
No soldering or crimping necessary, so the warranty remains intact. It fits all Harley-Davidson with the SAE J1850 digital bus system like TwinCam engine from 2004 on that have DEUTSCH plug connectors and the dashboard on the fuel tank (TwinCam).
Important: NOT compatible with any models that use Harley-Davidson LAN, e.g. Softtail from 2011 and later, Dynas 2012 and later and all Rocker and Dyna-models, that have instruments on the fork bridge.
Parts delivered: Breakout Box J1850 adapter with specific plug connector, 32 connection terminals, 2 x M3 mounting screws, 32 cable end sleeves, plastic sheet for fixing and anchoring the cables, 2 cable ties.
Dimensions:
Length, Height, Depth without plug connectors: 42 mm/ 42 mm/ 26,5 mm
Weight including plug connectors and Cables: approx. 80 g
Plug connectors: model specific, see drop down field and pictures
Fastening with two mounting screws M3

Functions
- Speed
- RPM

- controls indicator lamp for MIL (check engine warning)
- controls indicator lamp for turn signals
- controls indicator lamp for high beam
- controls indicator lamp for oil pressure
- controls indicator lamp for fuel reserve
- controls indicator lamp for alarm
Not available:
- indicator lamp for ABS (if existing)
- indicator lamp for 6. gear (if existing)
- indicator lamp for battery charge indicator (if existing)
- fuel gauge (if existing)

US$185.00
       
       
 

Bikes and Cars with Motogadget Gauges

BMW R nine T
Motoscope Pro
Bandit 600 with Motoscope Mini & Motosign Mini Bandit 600
Motoscope Mini & Motosign Mini
Tank integrated
Bandit 600 with Motoscope Mini & Motosign Mini Bandit 600
Motoscope Mini & Motosign Mini
Tank integrated
75 Opel
Motoscope Mini
Sven's KTM Sven's KTM
Motoscope Tiny
   
 

If you are looking for something you can't find in our web site, please feel free to ask.

Questions? Send us an email
Info@StreetFightersInc.com

Glendale, AZ

To order, please call
Phone: 623-581-1994

Shipping is not included in any prices.
Prices are subject to change.

We Accept

 
Alien Helmets Apparel Belly Pans Brake Lines Brake Reservoirs Cafe Racer Accessories Crash Sliders
Fairings Fat Handle Bar Kits Fiberglass 3D Details Front Fenders Foot Pegs Foot Peg Lowering Kits Fuel Caps
Gauges Grips Handle Bars Handle Bar Kits Head-Light Sets Levers Lowering Kits Suspension
Mirrors Mirror Extensions Parts On Sale Pre-Load Adjuster Rear Sets Screw Sets Sliders
Tail Lifter Tail Lights Tail / Seats Turn Signals Water Hose Kits    
    Questions About Us StreetFighters Customer Fighters Disclaimer
          Links Testimonials
Aprilia Buell BMW Ducati Harley Davidson Honda Hyosung
Kawasaki KTM MV Agusta Suzuki Triumph Victory Yamaha

Top USA Streetfighter Motorcycle Websites