Turn
Signals / Indicators
/
/
 |
|
 |
Motogadget Signals |
 |
M-Blaze
Cone Blinker
Black |
m-Blaze Disc Black Left side LED bar
end blinker for 7/8" or 1"
handlebars - SOLD EACH
Dimensions
Diameter: 35 mm (1 3/8")
Total length: 68 mm (2 11/16")
Length protruding out of the bar: 20
mm (3/4")
Length inside the bar: 48 mm
Length of cable: 100 cm (40")
Weight: approx. 40 g
Installation: rubber clamps for
inner handlebar diameter of 14mm up
to 21 mm are included.
Power consumption: approx, 7 Watt
This turn signal can be operated
like any other LED turn signal with
load resistors or all load
independent flasher relays from
motogadget (m-Flash, m-Wave, m-Stop,
m-Relay+)
It fits very nicley
with motogadget's m-Grip.
|
US$109.00
each signal |
 |
M-Blaze
Cone Blinker
Polished |
m-Blaze Disc
Black Left side LED bar end blinker for 7/8" or 1" handlebars -
SOLD EACH
Dimensions
Diameter: 35 mm (1 3/8")
Total length: 68 mm (2 11/16")
Length protruding out of the bar: 20 mm (3/4")
Length inside the bar: 48 mm
Length of cable: 100 cm (40")
Weight: approx. 40 g
Installation: rubber clamps for inner handlebar diameter of 14mm
up to 21 mm are included.
Power consumption: approx, 7 Watt
This turn signal can be operated like any other LED turn signal
with load resistors or all load independent flasher relays from
motogadget (m-Flash, m-Wave, m-Stop, m-Relay+)
It
fits very nicley with motogadget's m-Grip. |
US$109.00
each signal |
 |
M-Blaze
Disk
Blinker
Black |
m-Blaze Disc LED bar end blinker for
7/8" or 1" handlebars
Dimensions
Diameter: 35 mm (1 3/8")
Total length: 68 mm (2 11/16")
Length protruding out of the bar: 20
mm (3/4")
Length inside the bar: 48 mm
Length of cable: 100 cm (40")
Weight: approx. 40 g
Installation: rubber clamps for
inner handlebar diameter of 14mm up
to 21 mm are included.
Power consumption: approx, 7 Watt
This turn signal can be operated
like any other LED turn signal with
load resistors or all load
independent flasher relays from
motogadget (m-Flash, m-Wave, m-Stop,
m-Relay+)
It fits very nicely with
motogadget's m-Grip.
|
US$113.00
each signal |
 |
M-Blaze
Disk
Blinker
Polsihed |
m-Blaze Disc
LED bar end blinker for 7/8" or 1" handlebars
Dimensions
Diameter: 35 mm (1 3/8")
Total length: 68 mm (2 11/16")
Length protruding out of the bar: 20 mm (3/4")
Length inside the bar: 48 mm
Length of cable: 100 cm (40")
Weight: approx. 40 g
Installation: rubber clamps for inner handlebar diameter of 14mm
up to 21 mm are included.
Power consumption: approx, 7 Watt
This turn signal can be operated like any other LED turn signal
with load resistors or all load independent flasher relays from
motogadget (m-Flash, m-Wave, m-Stop, m-Relay+)
It fits very nicely with motogadget's m-Grip. |
US$113.00
each signal |

 |
M-Blaze Ice
Blinker
Black
Base |
-
absolutely unique, new design and
operating principle (TranzLight-Technology)
- very neutral and subtle look due
to the transparent glass body
- cutting edge Ultra HighPower
LED-Technology (IntensiLED)
- IC controlled constant power
source with 330kHz pulses
- bright light is emitted at an
almost 180° angle and thus visible
from the front, side and rear
Specs
Length w/o mounting thread: 65 mm
Total length w/ thread: 83 mm
Max. diameter: 20.5 mm
Cable length: about 100 cm
Weight: about 15 g
Installation: M8 threaded bolt
Power
consumption: about 3 Watt
The
m-Blaze Ice can be installed like
any other LED blinker with load
resistors or in conjunction with any
Motogadget flasher relays (m-Flash,
m-Wave, m-Stop, m-Relay+).
Parts included : on m-Blaze Ice
blinker with M8 thread, M8 nut,
approx. 100cm connector cable,
installation instructions
|
US$69.00
each signal |

 |
M-Blaze Ice
Blinker
Polished
Base |
-
absolutely unique, new design and operating principle (TranzLight-Technology)
- very neutral and subtle look due to the transparent glass body
- cutting edge Ultra HighPower LED-Technology (IntensiLED)
- IC controlled constant power source with 330kHz pulses
- bright light is emitted at an almost 180° angle and thus
visible from the front, side and rear
Specs
Length w/o mounting thread: 65 mm
Total length w/ thread: 83 mm
Max. diameter: 20.5 mm
Cable length: about 100 cm
Weight: about 15 g
Installation: M8 threaded bolt
Power
consumption: about 3 Watt
The m-Blaze
Ice can be installed like any other LED blinker with load
resistors or in conjunction with any Motogadget flasher relays
(m-Flash, m-Wave, m-Stop, m-Relay+).
Parts included : on m-Blaze
Ice blinker with M8 thread, M8 nut, approx. 100cm connector
cable, installation instructions |
US$69.00
each signal |


 |
M-Blaze
Pin |
m-Blaze Pin
Blinker
The m-Blaze Pin from motogadget – setting new
benchmarks for bolt-on blinker with Power LED technology.
Its tiny dimensions and minimal design make it almost disappear
on the vehicle. Due to the IntensiLED® Technology, the emitted
light is extremely bright when switched ON and definitely can no
longer be overseen.
Additionally, greatest visibility and safety will be ensured by
the patented TranzLight® Technology (TLT) with a wide beam
angle.
The bolt-on blinker is ECE
approved as front and rear direction indicator. The aluminum
casing is CNC machined and available with an anodized black
or mirror polish surface.
The benefits at a glance:
- absolute unique, new design and principle of operation
(light control by TranzLight® Technology)
- extremely attractive appearance due to transparent glass
body and very small aluminum base
- highest luminosity, achieved by state-of-the-art high
output LED technology (IntensiLED®)
- electronic voltage conditioning by IC controlled constant
power source with 330kHz pulses and safe protection
electronics
- extremely bright light in radiation direction, highly
visible light in nearly all directions.
Like any other typical LED
blinker, the motogadget blinkers can be operated with load
resistors or any of our load-independent flasher relays
(m-Flash, m-Wave, m-Stop, m-Relay+). Parts delivered: one
m-Blaze Pin blinker w/ M8 thread, M8 nut, approx. 100 cm
connector cable, installation instructions.
Please order two
blinker for a pair and four blinker for front and rear use!
|
Black
or
Polished
US$45.00
each signal |


 |
M-Blaze
Edge |
m-Blaze Edge
Blinker
The m-Blaze Edge from motogadget – is a new 3-in1
LED blinker. It incorporates a tail light, brake light and
blinker into one trend-setting design. Utilizing TranzLight-Technology
(TLT, patent pending), light from high-powered LED's is
precisely channeled and emitted.
The LED turn signal light is amber and the LED tail and LED
brake light are red.
The ambitious design of the metal
housing sets new standards in excellence. Available in chrome
and black chrome as a rear blinker, tail light and brake light.
Like any other typical LED blinker, the motogadget blinker can
be operated with load resistors or any of our load-independent
flasher relays (m-Flash, m-Wave, m-Stop, m-Relay+). Parts
delivered: one m-Blaze Edge blinker w/ M8 thread, M8 nut,
approx. 100 cm connector cable, installation instructions.
Please order two 3-1 m-Blaze Edge (one left side and one
right side) for rear use!
|
Chrome
or
Dark ChromeUS$99.00
each signal |
 |


 |
Bullet 1000
Extreme
|
Classic meets high Tech
The Bullet 1000 Extreme absolute
eye-catcher! Not only does is boast a sensational
design, but also the new Extreme model is one of the
brightest Kellermann indicators available. Never before
has there been such versatility allowing use in multiple
applications including cars, bikes and quads
(homologated according to ECE 6). The Bullet
Extreme can be installed within 20mm to the main
headlamp. Kellermann High Power LED Technology uses two
LEDs producing an extraordinarily bright indicator. Due
to this greater illumination it is recognized much more
quickly in traffic providing for maximum road safety.
ECE-tested for front and rear
- Increased safety due to enhanced visibility
Applicable on many vehicles (ATVs, cars, super seven,
trailers etc.)
- Kellermann HighPower LED Technology
- Long Life Protection Guard®, IC operated, 330 kHz
- High quality metal housing
- Suitable for 12 Volt applications
39 mm in
diameter |
Chrome, flat chrome
or blackUS$109.00
each signal
|


 |
Bullet 1000
PL
|
Classic meets high Tech
The Bullet 1000 PL replace the front
indicators because of their bright beam. Thanks to our IC
operated Longlife Protection Guard® system with the latest high
performance LEDs the Bullet 1000 LED series offers an especially
high light output with almost unlimited life span.
They are
available with clear glass
versions for all motorcycle models with 12 Volt
applications.
ECE-tested for front
Improved safety because of
brightness and direct response of the LED Kellermann HighPower LED Technology
Long Life Protection Guard ®, IC operated, 330 kHz
High quality metal housing
Suitable for 12 Volt;
Available in
Black, Chrome or flat Chrome housing
Amber turn signal and
white running light.
39 mm in diameter |
Chrome,
Flat chrome or black
US$119.00
each signal |



 |
Bullet 1000
DF
|
Classic meets high Tech
Our innovative indicator-brake-rear light combination in the
stylish Bullet 1000 housing makes it possible to take a new
direction when individualizing the rear of your bike. The
characteristically bright double rear lights of the Bullet 1000
DF sets new standards. Using our tried and tested High Power LED
Technology with IC-operated Longlife Protection Guard® system,
the compact housing of the Bullet 1000 DF indicator-brake-rear
light combination unit means reduced weight on all motorcycle
models.
39 mm in
diameter |
Chrome,
Flat chrome
or blackUS$119.00
each signal |
 |
Kellermann
Micro 1000 DF
LED
Dark
|
Innovation in 2012!
The ‘Dark’ side of Kellermann
The Micro 1000 DF Dark has two faces: black as the night /
bright as the day.
The combination of the perfect light and High Power LED
Technology with IC operated Longlife Protection Guard®
system and a strong glass tint offers new styling
options. The micro 1000 Dark hides what’s inside – while
the high performance LEDs provide a spectacularly bright
indicator signal, they are hidden behind the tinted
glass when not in use.
Our innovative indicator-brake-rear light combination in the
stylish micro 1000 housing makes it possible to take a new
direction when individualizing the rear of your bike. The
characteristically bright double rear lights of the Micro 1000
DF sets new standards. Using our tried and tested High Power LED
Technology with IC-operated Longlife Protection Guard® system,
the compact housing of the micro 1000 DF indicator-brake-rear
light combination unit means reduced weight on all motorcycle
models.
70 mm long, 17 mm high |
US$115.00
each signal
Black Housing |
 |
Kellermann
Rhombus
DF
LED
Dark
|
Another
Innovation in 2012!
The ‘Dark’ side of Kellermann
The Rhombus DF Dark
combines black styling with daylight-bright performance.
The combination of the perfect beam with reliable High
Power LED Technology and our IC operated LONG LIFE
PROTECTION GUARD® system with a strong glass tint offers new styling options for your motorcycle. The micro
Rhombus DF Dark hides what’s inside – while the high
performance LED's provide a spectacularly bright light,
when not in use they are hidden perfectly behind the
tinted glass. They offer a
perfect look with options available for all motorcycle
models.
ECE-tested for the rear
Black
tinted glass
spectacularly bright
Kellermann High Power LED
Technology
Long Life Protection Guard ®, IC operated, 330 kHz
Signal, tail and brake light
80 mm long, 21 mm high |
US$115.00
each signal
Black Housing |
 |
Kellermann
Micro 1000
Extreme LED
160.200 |
The ‘Extreme" side of Kellermann
The micro 1000 Extreme is the brightest Kellermann
indicator of all-time.
It is highly versatile and is the first Kellermann
indicator that can be used in multiple applications
including cars, bikes and quads (homologated according
to ECE 6). The micro 1000 Extreme can be installed
within 20mm to the main headlamp. Kellermann High Power
LED Technology uses two LEDs producing an
extraordinarily bright indicator. Due to this greater
illumination it is recognized much more quickly in
traffic providing for maximum road safety.
ECE-tested for front and rear
- Increased safety due to enhanced visibility
Applicable on many vehicles (ATVs, cars, super seven and
trailers etc.)
- Kellermann HighPower LED Technology
- Long Life Protection Guard®, IC operated, 330 kHz
- High quality metal housing
- Suitable for 12 Volt applications
- Replaceable flexible rubber adapter protects the
indicator from vibration damage and vandalism
micro 1000 Extreme
with M8 x 20 thread, flexible
mounting and clear glass
70 mm long, 17 mm high |
US$89.95
each signal
Black Housing |
 |
Kellermann
Rhombus
Extreme LED
166.200 |
The ‘Extreme" side of Kellermann
The micro Rhombus Extreme is an absolute
eye-catcher! Not only does is boast a sensational
design, but also the new Extreme model is one of the
brightest Kellermann indicators available. Never before
has there been such versatility allowing use in multiple
applications including cars, bikes and quads
(homologated according to ECE 6). The micro Rhombus
Extreme can be installed within 20mm to the main
headlamp. Kellermann High Power LED Technology uses two
LEDs producing an extraordinarily bright indicator. Due
to this greater illumination it is recognized much more
quickly in traffic providing for maximum road safety.
ECE-tested for front and rear
- Increased safety due to enhanced visibility
Applicable on many vehicles (ATVs, cars, super seven,
trailers etc.)
- Kellermann HighPower LED Technology
- Long Life Protection Guard®, IC operated, 330 kHz
- High quality metal housing
- Suitable for 12 Volt applications
80 mm long, 21 mm high |
US$89.95
each signal
Black Housing |
 |
Kellermann
Micro 1000 LED
Dark
142.100 |
The ‘Dark’ side of Kellermann
The Micro 1000 Dark has two faces: black as the night / bright as the
day.
The combination of the perfect light and High Power LED Technology with
IC operated Longlife Protection Guard® system and a strong glass tint
offers new styling options. The micro 1000 Dark hides what’s inside –
while the high performance LEDs provide a spectacularly bright indicator
signal, they are hidden behind the tinted glass when not in use.
Together with the BL 1000 Dark it offers a perfect look.
Versions available for all types of motorcycle.
Only turn signal, no running light
70 mm long, 17 mm high |
Black Only
US$89.95
each signal |

 |
Kellermann
Rhombus LED
Dark148.100 / 150 |
Undercover
The Rhombus Dark combines black styling with daylight-bright
performance. The combination of the perfect beam with reliable High
Power LED Technology and our IC operated LONG LIFE PROTECTION GUARD®
system with a strong glass tint offers new styling options for your
motorcycle. The micro Rhombus Dark hides what’s inside – while the high
performance LED's provide a spectacularly bright light, when not in use
they are hidden perfectly behind the tinted glass. Combining the front
and rear, they offer a perfect look with options available for all
motorcycle models.
ECE-tested for front and rear
Black
tinted glass
spectacularly bright
Kellermann High Power LED Technology
Long Life Protection Guard ®, IC operated, 330 kHz
Only turn signal, no running light
80 mm long, 21 mm high |
Black Only
US$89.95
each signal |

 |
Kellermann
Micro 1000 PL LED
141.200
Turn Signal
Running Light |
Long Lasting
The Micro 1000 LED replace the rear as well as the front
indicators because of their bright beam. Thanks to our IC
operated Longlife Protection Guard® system with the latest high
performance LEDs the micro 1000 LED series offers an especially
high light output with almost unlimited life span. They are
available in either modern clear or in the classic yellow glass
versions for all motorcycle models, and 6 or 12 Volt
applications.
ECE-tested for front and rear
Improved safety because of
brightness and direct response of the LED
Kellermann HighPower LED Technology
Long Life Protection Guard ®, IC operated, 330 kHz
High quality metal housing
Suitable for 12 Volt; 6 Volt on request
Available in
Black or Chrome housing
Amber turn signal and
white running light.
70 mm long, 17 mm high |
Black
Chrome
US$89.95
each signal |

 |
Kellermann
Micro 1000 DF
LED
K140.200
Turn / Tail / Brake Signal
|
Simply Triple
Our innovative indicator-brake-rear light combination in the
stylish micro 1000 housing makes it possible to take a new
direction when individualizing the rear of your bike. The
characteristically bright double rear lights of the Micro 1000
DF sets new standards. Using our tried and tested High Power LED
Technology with IC-operated Longlife Protection Guard® system,
the compact housing of the micro 1000 DF indicator-brake-rear
light combination unit means reduced weight on all motorcycle
models*.
* the existing dipped beam may need to be deactivated
** model specific indicator frequency versions are available,
based on load independent relays or power resistors
70 mm long, 17 mm high |
Black
Chrome
US$105.00
each signal |

 |
Kellermann
Micro Rhombus DF LED
146.200 / 250
Turn / Tail / Brake
Light |
1 + 1 = 3
Our innovative indicator-brake-rear light combination in our
distinctive Micro Rhombus housing offers new styling options for
the rear of your bike. The characteristically bright double rear
lights of the Micro Rhombus DF are the latest trend in indicator
design. The reliable and tested High Power LED Technology with IC
operated Longlife Protection Guard® system and compact housing
with combination indicator, brake and rear light means weight
reduction with versions available for all motorcycles.
ECE-tested for rear
Replaces the existing brake/rear light and indicator
Sensational new rear look
Kellermann High Power LED Technology
Long Life Protection Guard®, IC operated, 330 kHz
High quality metal housing
Suitable for 12 Volt applications
Replaceable flexible rubber adapter which protects the indicator
from vibration damage and vandalism
Turn signal, tail light and brake light.
Available in
Black or Chrome housing
80 mm long, 21 mm high |
Black
Chrome
US$105.00
each signal |
|
Micro Rhombus LED Clear Glass |
 |
Kellermann
Rhombus
LED
Clear Lens
Turn Signal126.200 /
250 |
Corners and edges Made
in Germany
The Micro Rhombus stands for recognizable, striking design. Its distinct
shape creates a unique style. Supplied in a stylish metal housing, the
Micro Rhombus has a very wide light beam. An almost unlimited lifespan
is guaranteed with our IC operated Longlife Protection Guard® system
and high performance LED's. The Micro Rhombus the front as well as the
rear indicators and gives a new look. Versions available for all
motorcycle models.
ECE-tested for front and rear
Improved safety because of the brightness and direct response of the LED
Clear Lens, Amber LED
Only turn signal, no running light
Available in Black or Chrome housing
80 mm long, 21 mm high |
US$74.95
each signal |
Micro 1000 LED White Lens |
 |
Kellermann
Micro 1000
LED
White Lens
Turn Signal127.200 |
Long lasting
The Micro 1000 LED replace the rear as well as the front
indicators because of their bright beam. Thanks to our IC
operated Longlife Protection Guard® system with the latest high
performance LEDs the micro 1000 LED series offers an especially
high light output with almost unlimited life span. They are
available in either modern clear or in the classic yellow glass
versions for all motorcycle models, and 6 or 12 Volt
applications.
ECE-tested for front and rear
Improved safety because of
brightness and direct response of the LED
Kellermann High Power LED Technology
Longlife Protection Guard®, IC operated, 330 kHz
High quality metal housing
Suitable for 12 Volt; 6 Volt on request
Black, Chrome or Satin Chrome
Only turn signal, no running light
70 mm long, 17 mm high |
US$74.95
each signal |
Micro 1000 LED Amber Lens |
 |
Kellermann
Micro 1000
LED
Amber Lens
Turn Signal
125.200 |
Long lasting
The Micro 1000 LED replace the rear as well as the front
indicators because of their bright beam. Thanks to our IC
operated Longlife Protection Guard® system with the latest high
performance LEDs the micro 1000 LED series offers an especially
high light output with almost unlimited life span. They are
available in either modern clear or in the classic yellow glass
versions for all motorcycle models, and 6 or 12 Volt
applications.
ECE-tested for front and rear
Improved safety because of
brightness and direct response of the LED
Kellermann High Power LED Technology
Longlife Protection Guard®, IC operated, 330 kHz
High quality metal housing
Suitable for 12 Volt; 6 Volt on request
Black, Chrome or Satin Chrome
Only turn signal, no running light
70 mm long, 17 mm high |
US$64.50
each signal |
 |
Kellermann
Micro 1000 H6W
Turn Signal
123.200 |
This classic indicator combines
tested Halogen technology with stylish, timeless design. Its
compact build and high quality metal housing mean reduced
weight.
It is the ideal companion to our BL 1000 series bar end
indicators. Suitable versions available for all motorcycle
models.
Excellent price/value ratio
6 Watt Halogen lamp
High quality metal housing
Suitable for 12 Volt
applications
Replaceable
flexible rubber adapter which protects the indicator from
vibration damage and vandalism
70 mm long, 17 mm high, 6W Halogen Light Bulb
Black, Chrome or Satin Chrome
Smallest turn signal we have ever seen
This turn signal is not bigger than your pinky finger
Only turn signal, no running light
Micro 1000 Accessories and spare parts see below |
US$43.95
each signal |
|
Bar
Ends Signals BL 2000 LED |

 |
Kellermann
Bar End Signal
BL 2000 LED Dark
110.200 |
Be seen but not seen
BL 2000 Dark with strongly tinted
glass
Made in Germany
ECE-tested
for front
Tinted ring-shaped lens –
spectacularly bright
A turn indicator which is also an elegant complement to your handlebars
Indicators visually merge into the bike when not in use
Kellermann
HighPower LED technology
Long Life Protection Guard®,
IC controlled, set at 330 kHz
High quality metal casing
Suitable for motorcycles with 12 volt electrical systems
Available in black
The BL 2000 further expands the Dark Design range with a small handlebar
end turn indicator which elegantly completes the line of the bars. Its
tinted ring-shaped lens sits unobtrusively in the black metal casing.
Although the turn indicator mounts discreetly on the motorcycle, when in
use it shows its true size and will surprise you with its highly
noticeable bright flashing. This is achieved by the use of the very
latest development in Kellermann HighPower LED technology. Also included
are adapters for fitting to all current handlebar types.
A load-independent relay or power resistors may be required to match
indicator signal frequency |
Black Housing
Black LensUS$125.00
each |
|
Kellermann
BL 1000 Bar End Signals LED |
 |
Kellermann
Bar End Signal
BL 1000 LED Dark122.100 |
Perfectly disguised
The BL 1000 Dark brings light into darkness and sets new
standards in motorcycle design.
This innovative design appears like a seamless extensions of the handle
bar.
The latest high performance LED's and our IC operated Longlife
Protection Guard® system make for a spectacularly bright indicator
signal.
The newly proportioned housing shape gives a clear line at the end of
the handlebar.
The BL 1000 Dark liberates styling from the restraints imposed by
conventionally styled front indicators and combines indicating function
with handlebar vibration damping.
Combined with the micro 1000 Dark it gives a perfect look.
Versions and adapters for most model handlebars are available.
The BL 1000 LED Dark has 2 lenses with 2 LED's in front and 1 LED
in back. |
Black Housing,
Black Lens
US$135.00
each signal |
 |
Kellermann
Bar End Signal
BL 1000 LED PL
121.200 |
See and be seen:
The BL 1000 PL offers a high brightness integrated
position light with the indicator.
A newly proportioned housing shape
creates a clean line at the bar end. Because of the specially developed
operating technique, our IC controlled
Longlife Protection Guard®
system and modern high performance LED's mean improved visibility and
speed recognition. Manually operated, with crystal clear double-look,
they give the impression of daylight-bright bulbs. As usual, the BL 1000
PL also dampens the vibrations of the handlebar. All necessary adapters
are supplied for mounting on to most model handlebars.
The BL 1000 Pl has 2 lenses with 2 LED's to the front, 1 LED for the
rear. |
Black, Chrome
Clear Glass
US$135.00
each signal |
 |
Kellermann
Bar End Signal
BL 1000 LED
120.200 |
New, and already a classic
The BL 1000 LED is the latest development in bar end indicators.
Our IC operated Longlife Protection Guard® system, modern high power
LED's and innovative clear glass look mean performance as well as
beautifully proportioned styling at the end of the handlebar.
The BL 1000 LED combines function with handlebar vibration damping.
Versions are supplied with necessary adapters for mounting on most
handlebars.
The BL 1000 LED has 2 lenses with 2 LED's to the front, 1 LED for the
rear. |
Black, Chrome
Clear Glass
US$119.95
each signal |
Kellermann
BL 1000 Bar End Signals |
|
 |

 |
Oberon
LED
Turn Signals
0008 |
Brand NEW mini
bi-directional LED motorcycle indicators from Oberon CAD/CAM designed to
increase safety and to alleviate most of the current LED aftermarket
indicators issues.
By using
8 high power wide angle LED on each side of the circuit board the
indicator is visible from both the front and back at the same time with
equal luminosity. LED’s offer a much longer life than ordinary filament
indicator bulbs.
With the small current draw of LED’s battery life is improved. One of
the commonest complaints of mini motorcycle indicators is the quality of
the lenses. Our unique lens envelopes the LED circuit board completely
by 360 degrees providing a melt proof, shake proof and loss proof cover.
These mini indicators are CNC machined from billet aluminum and are
available in black or silver anodized. Complete with stainless steel
fasteners, sleeved cable and a M8 threaded fitting to allow front or
rear universal fitting to the motorcycle.
Indicator body size: 68mm long x 27.5mm diameter x 20mm width. 15mm
spanner flats to aide tightening when fitting to your motorcycle In
summary, these E Marked 12V LED amber motorcycle indicators are the
finest quality and offer additional safety for any motorcycle and rider.
|
US$130.00
Pairincludes resistors |

 |
Oberon
LED
Bar Ends Signals
0014
|
Brand NEW bi-directional
LED handle bar mounted motorcycle indicators from Oberon Performance
CAD/CAM designed to increase safety and to alleviate most of the current
LED aftermarket indicators issues.
Using 8 high power wide angle LED on each side of the circuit board the
indicator is visible from both the front and back at the same time with
equal luminosity.
Often LED’s last longer than the motorcycle in which they are fitted.
With the small current draw of LED’s battery life is improved. One of
the commonest complaints of aftermarket motorcycle indicators is the
quality of the lenses. Our unique lens envelopes the LED circuit board
completely by 360 degrees providing a melt proof, shake proof and loss
proof cover. These indicators are CNC machined from billet aluminum and
are available in black or silver anodized. Complete with stainless steel
fasteners, sleeved cable and a brass collet to allow fitting to hollow
handlebars for most motorcycle 14mm to 22mm Indicator body size:
50mm long x 35mm diameter. |
US$195.00
Pair
includes resistors |
Economy
Indicators
 |
 |
P203-640 |
Mini indicator with a
black housing and smoke lens, stem length 22 mm
Lens diameter 36 x 29 mm, bolt M10, incl. 12V/21W halogen bulb |
US$21.80
Pair |
 |
P202-222 |
Lens dimension approx. 50
x 43 mm, long, swing damped rubber stem, screw M 10
21W bulb |
US$24.80
Pair |
 |
P203-312 |
CNC machined aluminum,
black housing,
Lens diameter 37 mm, stem length 20 mm, incl. 12V/21W bulb |
US$67.00
Pair |
 |
P203-100 |
LED indicator in a
chromed metal housing with clear lens.
Dimension: L.62 x W.18 x D.23 mm. M10 bolt |
US$74.20
Pair |
 |
P203-113 |
Chrome or black, grooved
aluminum housing, amber lens
Lens diameter 27 mm, pair, 12V/21W |
US$67.00
Pair |
 |
P204-220 |
LED indicator, mounting
screws adjustable,
black, clear lens, incl. 2 resistors.
Dimensions: head L x W x D 45 x 27,5 x 25,5 mm, total lengths approx. 83
mm |
US$55.30
Pair |

Spare Parts / Accessories |
Micro
1000 Accessories and Spare Parts |
 |
Flexible
silent-rubber fixation, with 25mm or 40mm M8 fastening screw thread
protects the micro 1000 against motor vibration. |
US$10.00 ea |
 |
Black or
Chrome
Ball ended linkage for inclined surfaces
Enables a horizontal alignment of the Micro 1000 when mounting it on
inclined surfaces. |
US$17.00 ea |
 |
Black or
Chrome
This rigid fixation arm, which has a M8x20mm or 40mm thread., replaces the
original silent rubber adapter. |
US$10.00 ea |
 |
25 mm or 40 mm
long.
Black, Chrome or Satin Chrome.
With this extension the length of the indicator arm can be elongated. The
extension is simply screwed in between the silent rubber adapter or rigid
fixation and the indicator body. |
US$7.50 ea |
 |
This adapter
enables fixation of the micro 1000 M8 fastening screw thread to
motorcycles with an original M12 fastening screw thread. |
US$4.00 ea |
 |
Halogen light
bulb H6W Individual halogen light bulb as spare part. |
US$7.00 ea |
 |
turn signal
glass micro 1000 Individual turn signal glass as spare part. |
US$11.00 ea |
 |
Ohmic resistor
(for 21W indicator relays) The extreme small construction of the micro
1000 demanded the application of a 6W halogen light bulb, which is
different in the power of commonly used 21W light bulbs. The ohmic
resistor can be mounted at any position in parallel to the micro 1000.
Together with the micro 1000 this resistor “simulates” a conventional
21W indicator. |
US$9.00 ea |
 |
Ohmic resistor
(for 21W indicator relays) The extreme small construction of the micro
1000 demanded the application of a LED, which is different in the power of
commonly used 21W light bulbs. The ohmic resistor can be mounted at any
position in parallel to the micro 1000 LED.
Together with the micro 1000 LED this
resistor “simulates” a conventional 21W indicator. |
US$10.00 ea |
BL 1000
Bar
End Signals Spare Parts |
 |
Individual light
bulb H21W as spare part. |
US$7.50 ea |
 |
The BL 1000
multifunction part as a spare part with plus contact and cable,
however without fixating rubber band adapters and nut. |
US$14.00 ea |
 |
Turn signal
glass F or R for in the front or rear, individual as spare part. |
US$11.00 ea |
 |
This additional
ground cable helps to establish an electrical connection between the BL
1000 and the motorcycle in case problems occur (for example with aluminum
or rubber fitted handlebars). 17-22mm & 21-24mm |
US$7.00 ea |
 |
This set
includes all rubbers, flat washer and nut for fixation of the BL 1000 into
motorcycle handlebars with an inner diameter between 11,5 till 24 mm.
(Included in each BL 1000 box) |
US$7.00 ea |
 |
Indicator body
with lenses, only in exchange for the damaged indicator body In case the
turn signal is damaged, it often suffices to exchange only the less cost
intensive indicator body/head. All other parts, including the
multifunction part, can be kept on being used. |
Starts at
US$45.00 ea |
 |
Indicator body
with lenses, only in exchange for the damaged indicator body In case the
turn signal is damaged, it often suffices to exchange only the less cost
intensive indicator body/head. All other parts, including the
multifunction part, can be kept on being used. |
Starts at
US$60.00 ea |
 |
The BL 1000
socket as a spare part for the light bulb used in the BL 1000 turn signal. |
US$10.00 ea |
 |
Ohmic resistor
(for 21W indicator relays) The extreme small construction of the micro
1000 demanded the application of a LED, which is different in the power of
commonly used 21W light bulbs. The ohmic resistor can be mounted at any
position in parallel to the micro 1000 LED.
Together with the micro 1000 LED this
resistor “simulates” a conventional 21W indicator. |
US$10.00 ea |

 |
GSG
Turn Signal
Brackets
50/60 |
CNC
Machined
Billet or Black anodized
Pair
Fork Diameter 35, 36, 37, 38, 39, 40,
41, 43, 45, 46, 48, 50, 52, 56, 60 mm |
Billet
US$100.00Black Anodized
US$110.00
|

 |
GSG
Signal / Headlight
Brackets
50/68 |
CNC
Machined Billet
68 mm from middle fork to middle middle hole
Billet or Black anodized
Pair
Fork Diameter 45, 46, 48, 49, 50, 52,
54, 55, 56 mm |
Billet
US$110.00Black Anodized
US$125.00
|
 |
GSG
Turn Signal
Brackets |
Necessary
if some headlight or fairings are mounted.
31-34, 35-38, 39-42, 43-46, 47-50, 51-54, 55-58 mm
Can also be used as
Headlight or Fairing mount with extensions.
Stainless extensions 180 mm long US$25.00
|
31
mm - 42 mm
US$35.00
43
mm - 58 mm
US$45.00
|
Bikes
and Cars with Kellermann Turn Signals |

TL 1000 with
BL 1000 Bar End Signals |

Harley with
BL 1000 Bar End Signals |

Harley with
BL 1000 Bar End Signals |

Bandit 600
Micro 1000 DF LED |

VRod
Mirco 1000 |

Lotus Seven
Micro 1000 LED Clear Lens |

Trailer
Micro 1000 Red LED/Clear Lens
Special order only. US$155.00 ea |

Softail
Micro 1000 |
|

Ducati 748
Micro 1000 |

ZRX
BL 1000 Brass Black / Clear Lens
Rizoma Grips, Oberon Clamp On Mirror |
|
If
you are looking for something you can't find in our web site, please
feel free to ask.
Questions?
Send us an email
Info@StreetFightersInc.com
Glendale, AZ |
To
order, please call
Phone:
623-581-1994 |
Shipping
is not included in any prices.
Prices are subject to change.
We
Accept
|
|