 |
GF
Fairing
Destroyer |
Universal,
Fiberglass Unpainted, Mounting Hardware
DE-Headlights Low & High
Wide: 280 mm, Deep: 320 mm, High: 160 mm
Fork Mounted
|
US$550.00 |
 |
GF
Fairing
Penetrator |
Universal,
Fiberglass Unpainted, Mounting Hardware
DE-Headlights Low & High
Wide: 280 mm, Deep: 320 mm, High: 160 mm
Fork Mounted
|
US$550.00 |
 |
Fairing
BV 307 |
Universal
Fiberglass, unpainted.
Mounting Material, Windscreen
Dual Head-Lights |
US$660.00 |
 |
Fairing
BV 312 |
Universal
Fiberglass, unpainted,
Mounting Material,
Dual Head-Lights,
Fork Mounted |
US$680.00 |
 |
Bike
Side
Fairing
B3 |
Universal
Fiberglass, unpainted, Mounting Material,
Head-Lights,
Fork Mounted |
US$610.00 |
 |
Bike
Side
Fairing
B4 |
Universal
Fiberglass, unpainted,
Mounting Material, Windscreen
Head-Lights,
Fork Mounted |
US$670.00 |
|
|
More
Universal Fairings
Click Here |
|
 |
GSG
MT
Headlight |
Headlight,
Stainless main plate,
Billet or black anodized fork clamps
H4 55W, Low/High Beam, 5W Parking Light
Signals are not included
It is not necessary to remove the top tree to install the
brackets
Fork Diameter 35, 36, 37, 38, 39, 40,
41, 43, 45, 46, 48, 50, 52, 54, 56, 60 mm |
Billet Brackets
US$365.00Black Brackets
US$380.00 |
 |
Urban
Headlight |
Fork clamps,
brackets,
headlight, necessary mounting hardware
H4 55W, Low/High Beam, 5W Parking Light
Height approx. 10 inches high
Width
Approx. 7 1/2 inches wide without brackets
Width
Approx. 9 inches wide with brackets
38 mm Fork Diameter
41 mm Fork Diameter
43 mm Fork Diameter
45 mm Fork Diameter
50/54 mm (upper/lower) Fork Diameter
It is necessary to remove the top tree to install the
brackets |
US$395.00 |
 |
GSG
Dual
Headlight |
Black
or Chrome Housing
Fork Clamps, Turn Signal Brackets
It is not necessary to remove the top tree to install the
brackets
Low Beam H7/50W, High Beam H4/60W |
US$355.00 |
|
|
More
Universal Headlight Kits
Click Here
|
|
|
Head-Light & Turn Signal
Brackets |
 |
GSG
Headlight Brackets 1 |
CNC
Machined
With or without Turn Signal Bracket
Short Arm 125 mm
Long Arm 155 mm
middle fork tube to middle hole
Fork Diameter 35, 36, 37, 38, 39, 40,
41, 43, 45, 46, 48, 50, 52, 54, 56, 60 mm |
Short
US$180.00
Long US$190.00
Turn Signal Brackets
US$10.00 |
 |
GSG
Headlight Brackets 2 |
Installation
of Turn Signals possible |
Aluminum
Bracket
Stainless Clamps
US$140.00All Stainless
Polished
US$100.00
|

 |
GSG
Turn Signal Brackets
60 mm |
CNC
Machined Billet
60 mm from middle fork to middle middle hole
Billet or Black anodized
Pair
Fork Diameter 35, 36, 37, 38, 39, 40,
41, 43, 45, 46, 48, 50, 52, 54, 56, 60 mm |
Billet
US$100.00Black Anodized
US$110.00
|

 |
GSG
Signal / Headlight
Brackets 68 mm |
CNC
Machined Billet
68 mm from middle fork to middle middle hole
Billet or Black anodized
Pair
Fork Diameter 45, 46, 48, 49, 50, 52,
54, 55, 56 mm |
Billet
US$110.00Black Anodized
US$125.00 |
 |
GSG
Turn Signal
Brackets |
Necessary
if some headlight or fairings are mounted.
31-34, 35-38, 39-42, 43-46, 47-50, 51-54, 55-58 mm
Can also be used as
Headlight or Fairing mount with extensions.
Stainless extensions 180 mm long US$25.00
|
31
mm - 42 mm
US$35.00
43
mm - 58 mm
US$45.00
|
 |
Windscreen
for Naked Bikes |
Dark Tinted
or Iridium Fly Screen
for Round Headlights or Dual Headlights
Mounting Hardware included |
Dark Tinted
US$140.00
Iridium
US$200.00 |
|
|
More
Screens Click Here |
|
 |
Seat/Tail
BH 1009 |
Fiberglass
Unpainted, Frame Adjustments Necessary,
Seat Cowl, Taillight, Bottom Plate, License Plate Bracket,
Mounting Hardware Included
One / Two Seater |
US$880.00 |
|
|
More
Universal Tail Sections
Click Here |
|
 |
GF
Tank Cover |
Fiberglass,
unpainted |
US$290.00
|
|
Rear
Sets & Replacement Foot Pegs |
 |
Gilles
Rear Sets |
High
Quality Aluminum,
CNC Production
Fully adjustable by 10 mm steps on bracket
Black, Gold or Titanium anodized |
95-00 |
US$550.00 |
 |
LSL
Rear Sets |
45
mm back, 35 mm higher
Extra
charge for fold up peg mounts with rear sets. US$35.00
|
91+ |
US$385.00
|
 |
GSG
Replacment
Foot Pegs |
Replacement
Foot Pegs for original Pegs
Anodized Silver,
Black, Gold, Blue,
Red, Green |
|
Each
Set
US$70.00
Front and Rear
US$130.00
|
 |
Oberon
Replacement
Foot Pegs |
Replacement
Foot Pegs for original Pegs
Anodized Purple,
Silver, Black, Gold,
Blue, Titanium, Red
Three Different Styles:
With Oval hole, Closed or with Stainless Steel Screws |
|
Front
US$70.00
Rear US$70.00 |
 |
GSG
Foot Peg
Lowering Kit |
Rider or Passenger
22 mm, 30 mm or 50 mm lower |
|
Pricing, please click here
|
|
Frame
Sliders / Crash Protectors |
 |
GSG
Crash Protector
Sliders |
CNC machined
billet brackets, plastic protector with steel insert,
black or
white,
60 mm in diameter with steel inserts for additional strengths.
Maximum protection for your bike.
Frame Sliders, Engine Protectors, Fork Sliders.
Pictures, pricing, information, click here
You will leave
StreetFighters Inc.
and visit pages
from our sister company
Wild Hair
Accessories
Click on back button to go back to
StreetFighters Inc.
|
|
 |
GSG
Fork Sliders |
Plastic
Protector, Black |
Pictures,
pricing, information,
click here |
|
Superbike
Kits / Upper Tree with Bar Clamps |
 |
Upper Tree with
Bar Clamps |
CNC machined billet
Upper Tree with bar clamps for 7/8 handle bars |
ZX
7R N/P 96-03
Pricing,
Click here
|
 |
Spiegler
Superbike Kit |
Top Tree Clamp
Windscreen & Fairing Modification Necessary
Silver Handle Bar, All necessary mounting hardware |
ZX
7R N/P 96-03
Pricing,
Click here
|
|
Handle Bars & Accessories |
 |
GSG
Brake & Clutch
Lever |
6 times adjustable even
while riding
Each Lever is only 60 grams light
Race tested, Perfect design
6 colors for Lever and Pointer
Short Lever: Approx. 50 mm shorter as original
Long Lever: Approx. 20 mm shorter as original
|
Complete
List &
Pricing, Click Here
|
 |
Grips |
Available in
Red, Silver, Blue, Gold, Black
|
More
Grips &
Pricing Click Here
|
 |
GSG
Handle Bars |
22
mm / 7/8 Aluminum
Handle Bars
7 different colors:More
Information
Click Here
|
Low Rise 7 LR
US$75.00
Superbike 22 SB
US$80.00
|
 |
Hagen
Handle Bar |
Aluminum
Handle Bar
Low Rise HAG 7
Drag Bar HAG 6
Black Only
More
Information
Click Here |
Low Rise
HAG 7
Drag Bar HAG 6
US$75.00 |
 |
GSG
Bar Ends |
Bar ends
for hollow aluminum handle bars
Available in:
Silver, Red, Blue,
Purple, Black, Gold,
Green, Titanium |
US$25.00
a set |
 |
Oberon
Bar Ends |
Aluminum Anodized
For hollow handle bar
only
Purple,
Silver, Black, Gold,
Blue, Titanium, Red
|
US$40.00
Set |
|
Brake
Rotors / Lines / Reservoir |
 |
Reservoirs |
CNC Billet
Machined Reservoir
All
Reservoirs Click Here |
|
 |
ABM
Brake Rotor
Front |
Ultra
lightweight stainless steel rotor, with titanium anodized aluminum
full Floaters & Carrier. Top braking performance. |
Front
US$310.00 each
96+
|
 |
ABM
Brake Rotor
Rear |
Ultra
lightweight stainless steel rotor,
with titanium anodized aluminum solid
Floaters & Carrier.
Top braking performance. |
Rear
US$160.00
96+
|
 |
Spiegler
Brake Lines |
Stainless
braided lines: Standard Kit comes with Silver Fittings and Clear Cover.
Fittings are available in:
Gold, Chromed, Blue,
Black, Purple, Red,
Charcoal, Green
Covers are also available in different colors.
Matching banjo Bolts also available.
More info about Spiegler |
Starts at
Rear Line
US$59.00
Clutch Line
US$68.002 Line Front
US$114.00
3 Line Front
US$149.00
|
|
Screw
Sets Made by GSG-Moto |
 |
GSG
Screw Sets
&
Oil Filler Caps |
Billet Allen
Head
Screws with the different head.
70% lighter than steel |
CNC machined,
Rolled Threat
AL7075 (T6) Torque
up to 600N/m
Anodized in
Blue, Gold, Red,
Silver and Black |
Click
here for
complete List |
 |
GSG
Screw Sets
&
Oil Filler Caps |
Stainless
Steel Allen Head Screws with CNC machined heads |
|
Click
here for
complete List |
 |
GSG
Water Hoses |
3 x Hoses right side,
1 x Hoses left side, 6 x Clamps.
Original hose on water pump will be used.
Fittings are also available in
Red, Blue, Chrome, Gold,
Black
|
96+ |
Silver Clamps
US$420.00
Anodized Clamps
Please add 10%
|
 |
Oberon
Pre-Load
Adjuster |
CNC machined Fork Pre-Load Adjusters.
Complete with stainless steel fasteners and Allen key.
Purple,
Silver, Black, Gold,
Blue, Titanium, Red |
|
US$55.00
Set |
 |
Oberon
Brake Cover Front |
Billet Anodized
Purple,
Silver, Black, Gold,
Blue, Titanium, Red |
|
US$40.00
each |
 |
Oberon
Clutch Cover |
Billet Anodized
Purple,
Silver, Black, Gold,
Blue, Titanium, Red |
|
US$40.00
each |
 |
Oberon
Fuel Cap
Kawasaki |
5,
7 or 8 hole
Keyless billet aluminum fuel cap
Direct replacement Cap has a single turn
Material: 6000 Series Aluminum, O-Rings and Viton gaskets.
Body colors: Black and Silver
Cap colors: Black, Blue, Gold,
Red, Silver and Titanium
More
Fuel
Caps
Click Here |
|
US$140.00 |
 |
Kellermann
Turn Signal
Rhombus
LED
White Glass |
New
Innovation!
Latest top level technology integrated in the shapely metal body
out
of the home of Kellermann.
In addition to our micro 1000 LED it has been
felicitous to expand our product range to the micro 1000 LED white.
Impressively is the clear brilliant glass, whereby open up brand-new
design variations.
Clear Lens, Amber LED
Black, Chrome or Satin Chrome
Only turn signal, no running light
A must for every StreetFighter!! |
All Kellermann indicators, information & pricing, please click here |
 |
Kellermann
Turn Signal
Micro 1000
LED
White Glass |
Innovation!
Latest top level technology integrated in the shapely metal body
out of the home of Kellermann.
In addition to our micro 1000 LED it has been
felicitous to expand our product range to the micro 1000 LED white.
Impressively is the clear brilliant glass, whereby open up brand-new
design variations.
Clear Lens, Amber LED
Black, Chrome or Satin Chrome
Only turn signal, no running light
A must for every StreetFighter!! |
All Kellermann indicators, information & pricing, please click here |
 |
Kellermann
Turn Signal
Micro 1000
LED
Amber Glass |
ECE type -
approved as rear and front indicator. Latest LED - technology in the
design and size of the mature micro 1000 (halogen). In conjunction with
the LED – technology, the MOSFET controlled internal LONG LIFE
PROTECTION GUARD circuit arrange for an extreme high durability. The ideal
trait of radiation of the high-performance optic and the quick responding
behavior of the LED arrange for more reliability.
Black, Chrome or Satin Chrome
Only turn signal, no running light
A must for every StreetFighter!! |
All Kellermann indicators, information & pricing, please click here |
 |
Kellermann
Turn Signals
Micro 1000 |
70 mm long, 17 mm
high, 6W Halogen Light Bulb
Black, Chrome or Satin Chrome
Smallest turn signal we have ever seen
This turn signal is not bigger as your pinky finger
Only turn signal, no running light |
All Kellermann indicators, information & pricing, please click here |
 

|
Kellermann
Bar End Signals
BL 1000
White |
The original
bar end signals made in Germany.
Fits every hollow handle bar.
White Lenses on both sides.
Available in Aluminum (Black, Polished)
Brass (Black, Satin Chrome, Chrome High
gloss)
Stainless Steel (Polished)
Also vibration dampener
Licensed
protected design
made of high quality materials in CNC-production
21W Halogen light with 600 lumen light capacity
A must for every StreetFighter!! |
All Kellermann indicators, information & pricing, please click here |

|
Kellermann
Bar End Signals
BL 1000 |
The original
bar end signals made in Germany.
Fits every hollow handle bar.
Amber Lenses on both sides.
Available in Aluminum (Black, Polished, )
Brass (Black, Chrome High
gloss)
Stainless
Steel (Polished)
Also vibration dampener
Licensed
protected design
made of high quality materials in CNC-production
21W Halogen light with 600 lumen light capacity
A must for every StreetFighter!! |
All Kellermann indicators, information & pricing, please click here |
 |
GSG
Mirror 1 |
Real Mirror Glass, -25%,
Convex Mirror Glass
CNC Machined Aluminum
Hand made in Germany
Mirror turn able 360 degrees |
Billet
US$125.00
eachBlack or Silver
Anodized
US$130.00
each
|
 |
GSG
Mirror 2 |
Real Mirror Glass, -25%,
Convex Mirror Glass
CNC Machined Aluminum
Hand made in Germany
Mirror turn able 360 degrees |
Billet
US$135.00
each |
 |
GSG
Mirror Extensions |
CNC Machined Billet |
Billet
US$40.00
Set
Black or Silver Anodized
US$45.00
Set |
 |
Oberon
StreetFighter
Mirrors
Round |
Universal fitting bar end mirrors. 60 or 75 mm diameter,
Surface
chrome glass and automotive standard convex giving superb visibility and
weather resistance
Collet fitting system. Aluminum components, black or silver
anodized. 6 mm grub screws secure mirror in any
position.
Fits hollow handle bar diameters from 12 mm to
22 mm.Click
here for adjustability
|
60 mm glass
US$70.00 each75 mm glass
US$75.00 each |
|
|
More
Mirrors
Click
Here
|
|
|
If
you are looking for something you can't find in our web site, please
feel free to ask.
Questions?
Send us an email
Info@StreetFightersInc.com
Glendale, AZ |
To
order, please call
Phone:
623-581-1994 |
Shipping
is not included in any prices.
Prices are subject to change.
We
Accept
|
|
|